How to Cut a 135 Degree Angle on a Miter Saw? Solutions+Guide

You’re making your first piece of furniture and you want to cut a corner perfectly. Well, this is where a miter saw comes in. While it might seem a little intimidating at first, it’s a pretty straightforward tool.

You need to cut a 135-degree angle on a miter saw, but you’re not sure how to do it. Cutting a 135-degree angle on a miter saw can be tricky if you don’t know how to do it. You could end up with an uneven cut that ruins your project.

We’re here to help. In this guide, we’ll walk you through the steps of cutting a 135-degree angle on a miter saw. By following our simple instructions, you’ll be able to make precise cuts every time.

How to Cut a 135 Degree Angle on a Miter Saw?

Now that you know what to consider let’s see step-by-step how to Cut a 135 Degree Angle on a Miter Saw.

If you’re looking to make clean, precise cuts on your next woodworking project, then you’ll need to learn how to cut a 135-degree angle on a miter saw. While it may seem like a daunting task at first, it’s quite easy once you know the steps. Here’s what you need to do:

Step 1: Select your blade

If you have a saw with a blade on it, you need to select your blade. The blade determines the size of the cut. For most materials, you would use a standard blade. If you are working with harder woods, then you need to use a blade that is made for those materials.

Step 2: Place your material on the platform

Now that you have your blade selected, it is time to place your material on the platform of the saw. Depending on the size of your material, you may need to use clamps to hold it in place.

Step 3: Line up the blade with the mark

This is where you will use the miter saw’s laser guide or measuring tape. Place the blade on the mark that you want to cut. For most projects, you will want to make sure that the blade is lined up in the center of the mark.

Step 4: Slowly and steadily move the saw down through the wood

Now it is time to start cutting. Gently push the saw down through the wood. The blade should be moving at a steady pace. Do not try to force the blade through the material.

Step 5: Repeat the process on the other side of the wood

Once you have cut through the material, you need to repeat the process on the other side. This will ensure that your cuts are symmetrical.

With these simple steps, you will be able to cut a 135-degree angle on a miter saw like a pro! Remember to take your time and be careful when operating the saw. With a little practice, you will be able to make perfect cuts every time. 

What to consider before cutting a 135-degree angle on a miter saw?

There are a few things to keep in mind before cutting a 135-degree angle on your miter saw.

• The most important thing is to make sure that the workpiece is properly secured. Otherwise, the blade could kick back and cause serious injury.
• Another thing to consider is the size of the blade. A larger blade will be able to make a deeper cut, but it will also be more difficult to control.
• You’ll also need to decide what kind of blade you want to use. A standard blade will work for most projects, but if you’re cutting something particularly thick or difficult, you may want to consider using a specialty blade.

How to measure 135 Degree Angle on a Miter Saw?

There are a few different ways that you can measure 135-degree angles on a miter saw.

By using a protractor, you will want to align the zero mark on the protractor with one of the blade teeth. Then, you will need to rotate the protractor until the other blade tooth lines up with the 135-degree mark. Make sure that you keep the protractor level as you are doing this.

If you are using a combination square, you will want to align the blade with one of the 45-degree marks on the square. Then, you will need to rotate the square until the other blade tooth lines up with the 135-degree mark. Again, make sure that you keep the square level as you are doing this.

Using a ruler or tape measure,

You will need to estimate the length of one of the blade teeth. Next, you need to measure out this same length from the end of the ruler or tape measure. The point where you stop measuring will be your 135-degree angle.

Keep in mind that it is always best to use a tool that is specifically designed for measuring angles, such as a protractor or combination square. However, if you do not have either of these tools available, you can still estimate the angle using a ruler or tape measure. Just be sure to use a level so that your measurement is as accurate as possible.

Ways to cut a 135-degree angle on a miter saw

There are a few different ways that you can cut a 135-degree angle on a miter saw. The first way is to use the adjustment knob on the saw to tilt the blade. This is the easiest way to make this type of cut.

Another way to cut a 135-degree angle is to use a jig. A jig is a piece of wood or metal that you attach to the saw. This will help guide the blade and keep it at the correct angle.

The last way to cut a 135-degree angle is to use a fence. A fence is an attachment that you can put on the saw. It will help guide the blade and keep it at the correct angle.

Whichever method you choose, make sure that you practice on some scrap wood before you try it on your project. This will help you get the feel for the cut and make sure that you don’t make any mistakes.

To Make a 135-Degree Angle Cut With Miter Saw Use the Following Safety Measures

When cutting any type of material, it is important to use the proper safety measures to protect yourself and others. When using a miter saw, there are a few specific safety measures you should take:

1. Always wear eye protection when using a miter saw.

2. Be sure to keep your hands clear of the blade at all times.

3. Always cut away from your body.

4. Use a push stick or other device to keep your fingers clear of the blade when making cuts near the end of a piece of material.

5. Be sure to unplug the miter saw before making any adjustments or repairs.

6. Keep the area around the miter saw clean and free of clutter.

7. Never try to force the blade through the material – let the saw do the work.

8. Be sure to use the proper blade for the material you are cutting.

9. Always support long or wide pieces of material properly to avoid kickback.

10. Wear proper clothing and footwear when using a miter saw – no loose clothing or jewelry that could get caught in the blade.

Following these safety measures will help to ensure a safe and successful cut.

Final Thoughts

There are a few different ways to cut a 135-degree angle on a miter saw. The best way to choose the right method is to practice on some scrap wood before you start your project. This will help you get the feel for the cut and make sure that you don’t make any mistakes. Remember to always use proper safety measures.

When using a miter saw. With a little practice, you will be able to make perfect cuts every time. I hope that this article was helpful and that you now have a better understanding of how to cut a 135-degree angle on a miter saw. If you have any questions or comments, please feel free to leave them below.